✓ 14+ Years Experience ✓ 3-Month Warranty ✓ Licensed & Insured ✓ Same-Week Service

Stove & Oven Repair in Marin County

Gas and electric range repair for all Marin County homes — burners, igniters, heating elements, and more.

Transparent pricing • 3-month warranty • Same-week appointments

Mon-Fri 8AM-5PM • 112 Bayo Vista Way, San Rafael, CA 94901

Stove and Oven Repair Experts in Marin County

When your stove or oven stops working correctly, meal preparation becomes a frustrating challenge. Whether you have a gas range with a burner that won't light, an electric oven that won't reach temperature, or a high-end professional range that has developed an intermittent fault, A1 Appliance Repair has the expertise to diagnose and fix it. We have been serving Marin County homeowners since 2012 and work on every major brand and fuel type.

Common Stove and Oven Problems We Repair

Gas Burner Not Lighting

A gas burner that refuses to ignite is one of the most common service calls we receive. The most frequent causes are a worn or cracked igniter, clogged burner ports filled with food debris, a faulty spark module, or a broken igniter switch. You may hear the burner clicking repeatedly without producing a flame, or you may hear no clicking at all. We clean the burner assembly thoroughly, test the igniter and spark module, and replace defective components so every burner lights reliably on the first try.

Oven Not Heating or Heating Unevenly

An oven that won't heat or that heats unevenly can ruin meals and create food safety concerns. For electric ovens, the most common cause is a burned-out bake element or broil element. For gas ovens, a weak or failed igniter is usually responsible — modern gas ovens use a glow-bar igniter that must reach a high enough temperature to open the gas valve, and these wear out over time. A defective oven temperature sensor or a poorly calibrated thermostat can also cause erratic temperature behavior. We replace the faulty component and verify oven calibration before we leave.

Inaccurate Oven Temperature

If your oven runs too hot or too cold — even when it eventually reaches the set temperature — the oven temperature sensor is usually to blame. A worn door gasket that allows heat to escape can also cause the oven to cycle constantly and produce inconsistent results. We test oven temperature accuracy with a calibrated probe thermometer and replace any components that prevent the oven from holding a steady temperature.

Broken Igniter

A faulty igniter is among the most common gas range and oven failures. Surface burner igniters wear out and begin clicking constantly even when a burner is not in use, which can be irritating and waste electricity. Oven igniters fail gradually, causing the oven to take an unusually long time to heat up before the valve eventually fails to open at all. Replacing the igniter is typically a straightforward repair that restores normal operation immediately.

Control Panel and Electronic Issues

Modern stoves and ovens use sophisticated electronic control boards to manage burner igniters, oven temperature cycling, timer functions, and self-cleaning cycles. A failed control board can cause a range of symptoms — burners that won't ignite, an oven that won't start, error codes on the display, or a unit that appears completely dead. We diagnose control board failures and replace faulty boards to restore full functionality.

Self-Cleaning Problems

The self-cleaning cycle locks the oven door and heats the interior to extremely high temperatures to incinerate food residue. Problems include the door lock mechanism failing (leaving you unable to open the oven after a cycle), the oven overheating and tripping a thermal fuse, or the self-clean cycle not completing. We repair door lock mechanisms, replace thermal fuses, and address the underlying causes of self-clean failures.

Gas vs. Electric Range Repairs

We service both gas and electric ranges, as well as dual-fuel ranges that combine a gas cooktop with an electric oven. Gas range repairs often involve igniters, burner caps, gas valves, and spark modules. Electric range repairs typically involve heating elements, temperature sensors, control boards, and surface element switches. Induction cooktops require specialized diagnostic knowledge, and we have experience with induction units from Bosch, GE, and other manufacturers as well.

Brands We Service

Marin County homes are home to some of the most discerning cooks in the Bay Area, and many kitchens feature professional-grade ranges. We repair:

Our Repair Process

  1. Call to schedule: Reach us at (415) 297-5833. We offer same-week appointments throughout Marin County.
  2. Diagnosis: Our technician inspects your range, tests components, and identifies the root cause of the problem.
  3. Upfront quote: We provide a complete, transparent quote before starting any repair work.
  4. Repair: We complete the repair using quality parts — most jobs are finished in a single visit.
  5. Warranty: All repairs are backed by a 3-month warranty covering both parts and labor.

Serving All of Marin County

We provide stove and oven repair throughout all of Marin County, including San Rafael, Novato, Mill Valley, Corte Madera, Larkspur, Greenbrae, Kentfield, San Anselmo, Fairfax, Sausalito, Tiburon, Belvedere, and Ross. We are locally based in San Rafael, which means fast response times across the entire county.

Our Pricing

$95
Diagnostic Fee
Waived with repair
$185
Minimum Labor
Upfront pricing
3-Month
Warranty
Parts & labor

Other Appliance Repair Services in Marin County

We Serve All of Marin County

What Our Customers Say

★★★★★ 4.9 out of 5 • 93+ reviews on Yelp
★★★★★

"He did a great job and was very quick. I will definitely refer him to friends and family!"

— Melissa O.

★★★★★

"Vlad was great. Communication was very easy. He provided a prompt quote, his company was easy to reach, quick to return calls and to schedule. He kept my wife and I from needing to buy a new refrigerator. Thanks Vlad!"

— Jeffrey H.

★★★★★

"Awesome! Fixed the high-pitched squealing noise our dryer was making — very courteous and professional. I felt the price was fair, and will definitely call in for future repairs."

— Alise I.

Stove & Oven Repair FAQ

Why won't my gas stove burner light?

A gas burner that won't light is typically caused by a faulty igniter, clogged burner ports with food debris blocking the gas flow, a failed spark module, or a broken igniter switch. You may hear continuous clicking without a flame, or no clicking at all. We clean the burner assembly, test the igniter and spark module, and replace any defective components to restore reliable ignition on every burner.

My oven isn't heating to the right temperature — what's the problem?

Temperature inaccuracy is most often caused by a failing bake or broil element (electric ovens), a defective oven igniter (gas ovens), a faulty oven temperature sensor, or a miscalibrated thermostat. A worn door gasket allowing heat to escape can also force the oven to cycle excessively, producing inconsistent temperatures. We test each component and replace the root cause so your oven holds accurate temperature reliably.

Do you repair Wolf and Viking ranges in Marin County?

Yes. Wolf and Viking are two of the most popular professional-grade ranges in Marin County, and we are experienced in servicing both brands. We also repair GE, GE Monogram, Bosch, LG, Samsung, KitchenAid, Thermador, Dacor, Bertazzoni, and most other brands. Call (415) 297-5833 to schedule service.

Is it safe to use my stove if one burner isn't working?

For electric stoves, a single non-working burner is generally safe to work around while you wait for repair. For gas stoves, it depends on the failure mode. If you smell gas, hear continuous clicking without ignition, or notice the burner releasing gas without lighting, do not use that burner and call us promptly. A malfunctioning gas igniter that keeps clicking can release unburned gas and create a hazard. We offer same-week appointments so you don't have to wait long.

How much does stove/oven repair cost?

We charge a $95 diagnostic fee, waived when you proceed with repair. The minimum labor fee is $185. You will receive a complete, transparent quote before any work begins. Call (415) 297-5833 to schedule your appointment.

Call Now